PCsensor.com - 1 outer NTC sensor thermometer

Shop by Category

Featured Product

1 outer NTC sensor thermometer

Information

Products: 42
Categories: 13
Prices: US Dollars

Currency

Language

1 outer NTC sensor thermometer

Location:

/Thermometer/1 outer NTC sensor thermometer

Product Information
Description

Hid TEMPerNTC thermometer is a measurement device using USB port to connect to a computer or other machines. It has two sensors, one is inside and the other is outside. The two sensors can work at the same time and they are protected from water. It can measure the temperature of the machine and the environment accurately. It must be connect to the computer to start working. Hid TEMPerNTC can be use in computer room, weather, environment and special environment of two point temperature and the differences of temperature testing.

2. Packing specification

Name of the part	Specification	Quantity
TEMPerNTC		1
Driver CD	3.5inch	1
USB extended cable	0.8m	1
Using instruction card	-	1

3. Function & Feature

l Range of measuring: TEMPerNTC inner: -40~+120 C; -40~+248F; outer -50~+150C,

l Resolution rate: 0.06C

l Precision: + 1.5C;

l Electricity:< 10 mA;

l Recharging method: PC or AC transfer USB port adapter

l Support Windows NT,XP, VIST;

l Memory requirement: 20M

l Data auto save to be txt or csv format, can be open by excel;

l Send mails function

l Graph transfer function

4. Installing instruction

Software installing instruction: please go to our website to download the process

a) Uninstall the USB driver

b) Install dotnetfx.exe, if your computer system is Vista, may be you don’t need to install this process. Dotnetfx.exe is framework 2.0 of Microsoft, you can download it from the website of Microsoft;

c) Decompress TEMPerNTC.rar to you computer, and running TEMPerNTC\TEMPerNTC.exe.

Hardware installing:

Plug the thermometer into the USB port of the computer to connect it. If you plug it correctly the red light in the device will be turned on..

5. Operating instruction

a) Running TEMPerNTC.exe, and plug the device into the computer then click “reading” to start measuring the temperature. See the picture below:

TEMPerNTC_running

Picture 1 Running TEMPerNTC.exe

b) Loading the curve graph: You can load the curve graph on the “Curve” option part. Note, the device must be connecting to the computer to work, so the curve graph is the one about the real time temperature. And the function button can move, magnify, print, copy and save the curve graph.

Picture 2 Curve graph

c) Setting of sending emails :

On the “email” option you can set the condition of sending the temperature records to your mail box. The condition includes mail address of receiver, sending interval, the subject of the mail and the mode of sending or stop. When you finish these setting please remember to click “save setting”, then the system will begin to send mails to you according to you setting.

Picture 3 Mail sending

d) Setting

In the “setting” option you can transfer the different measuring units, and set a upper and lower limit, the reading interval and the language. Also you can calibrate the inner and the outer temperature here if there is some discrepancy between the real temperature and the reading records. Note, the reading interval is the speed of the device reading temperature, but the recording interval is to control the speed of recording the data to your computer.

To calibrate the temperature: When you first use the device or found the temperature is higher or lower than the actual temperature, you can calibrate it on setting option. For example, if the actual temperature is 26 degree centigrade, but the number that the device read is 28 degree centigrade, you should input -2 to the calibrate table ;If the actual temperature is 28 degree centigrade but the reading is 26 degree centigrade, so you should input 2, and then click the “save” button to save your setting.

TEMPerNTC_setting

Picture 4 Setting

e) Show Data

You can reintroduce the data that have been saved before into the system and transfer them into the curve to contrast with the new data and analyze the differences.